Fiberglass Backflip On Budget Bob Freestyle Jet Ski Hull
Product Description
Fits Yamaha Super Jet 701 motor and pump and Kawasaki Jet Ski Models 650 / 750 / 800 motor and 750 / 800 pump.
Fiberglass Version weighs:
Standard - 70-80lbs
Surf - 90-100lbs
Adjustable 'BOB Hold' Footholds
-Allows 3 inches of movement, up and down.
-Can be adjusted for angled or flat foothold.
Set Back Pump
-Pump and intake are 3 inches back from the original BOB.
-2011 BOB now uses the Stock Super Jet Drive Train Length.
-Turning is more predictable, much more stable.
Smaller Hood
-Lower Profile Hull and Smaller Hood.
-Upgraded breather system.
Incorporated Stock Super Jet Hood Latch
-Easy to remove and lock and the Hood.
-No more Ratchet Strap.
Based on Yamaha pump style. Kawasaki pump style is also available.
-PVE Wet Lay Up
-Gel Coat White Finish
-Built in Tubbies
-Pump Shoe Included
-Dual Cooling lines
-Versa Plug Scupper Valve
-2" Exhaust Tube
-Trim Tube
-Steering Cable Fitting
-Recessed Bow Eye Bar
-Hood Seal
-Hood Breather Hoses
-Foot Holds
-Stock BOB Graphics
All Hulls include BOB Holds and Hydro-Turf Padding. ALL Parts from a Yamaha Super Jet will bolt directly on to the Gen2 BOB. Now you don't need to purchase a shorter midshaft, the stock Super Jet Midshaft now works.
Hull
- Length - 78.5"
- Width - 26.5"
- Height - 24"
Tray
- Length - 28.5"
- Width - 17.5"
Stock Gas Tank, Air Filters and Waterbox all fit with a Stock Pipe or Factory B-Pipe.
Its really short... Is it good for anything besides backflips?
Being a short hull, many people get the idea that it'll ride too nose high, or won't be stable for cruising around. In fact in 2011 the Bob Hull proved to be a 360 helicopter machine as much as a backflip machine. The Gen2 is totally different. Being short makes it easy to throw around, and the set-back pump and widened hull helps with the stability of cruising around the lake and burning turns. Riding at low speeds/ idling won't make the nose of the ski stick up either. The nose does ride higher than a Super Jet, but not by much. Riders of all sizes and abilities will easily adapt to the riding style of the Gen 2 hull and will really love how easy it is to 'throw around'. Once you ride a Gen2, your Super Jet will never feel the same again!
So, is it good in the surf?
While the Gen2 continues to excellently perform in Flat Water, it has also been proven to be a great Surf Hull among numerous Freeriders. Although it was developed as a flat water hull, the Gen2 has much potential in Ocean Riding. We understand that everyone has their preferences when it comes to riding, and even though not everyone will instantly like how the Gen2 rides in the surf, we've built multiple hulls for surf riding, and so far, each owner has been more than impressed with its abilities in freeriding, both in the 20-foot swells of the Australia Surf and in the over head waves of Oceanside and Pismo.
What else?
Unlike some popular hulls that are on the market, all Gen2 hulls and BOB products are made in California, USA. All hulls are hand laid by full-time fiberglass Technicians in a complete fiberglass shop inside a massive PWC shop. All Gen2 hulls also include a 'Made in USA' decal in the handle pole bracket area as part of the standard graphic kit.
Fiberglass Version weighs:
Standard - 70-80lbs
Surf - 90-100lbs
Adjustable 'BOB Hold' Footholds
-Allows 3 inches of movement, up and down.
-Can be adjusted for angled or flat foothold.
Set Back Pump
-Pump and intake are 3 inches back from the original BOB.
-2011 BOB now uses the Stock Super Jet Drive Train Length.
-Turning is more predictable, much more stable.
Smaller Hood
-Lower Profile Hull and Smaller Hood.
-Upgraded breather system.
Incorporated Stock Super Jet Hood Latch
-Easy to remove and lock and the Hood.
-No more Ratchet Strap.
Based on Yamaha pump style. Kawasaki pump style is also available.
-PVE Wet Lay Up
-Gel Coat White Finish
-Built in Tubbies
-Pump Shoe Included
-Dual Cooling lines
-Versa Plug Scupper Valve
-2" Exhaust Tube
-Trim Tube
-Steering Cable Fitting
-Recessed Bow Eye Bar
-Hood Seal
-Hood Breather Hoses
-Foot Holds
-Stock BOB Graphics
All Hulls include BOB Holds and Hydro-Turf Padding. ALL Parts from a Yamaha Super Jet will bolt directly on to the Gen2 BOB. Now you don't need to purchase a shorter midshaft, the stock Super Jet Midshaft now works.
Hull
- Length - 78.5"
- Width - 26.5"
- Height - 24"
Tray
- Length - 28.5"
- Width - 17.5"
Stock Gas Tank, Air Filters and Waterbox all fit with a Stock Pipe or Factory B-Pipe.
Its really short... Is it good for anything besides backflips?
Being a short hull, many people get the idea that it'll ride too nose high, or won't be stable for cruising around. In fact in 2011 the Bob Hull proved to be a 360 helicopter machine as much as a backflip machine. The Gen2 is totally different. Being short makes it easy to throw around, and the set-back pump and widened hull helps with the stability of cruising around the lake and burning turns. Riding at low speeds/ idling won't make the nose of the ski stick up either. The nose does ride higher than a Super Jet, but not by much. Riders of all sizes and abilities will easily adapt to the riding style of the Gen 2 hull and will really love how easy it is to 'throw around'. Once you ride a Gen2, your Super Jet will never feel the same again!
So, is it good in the surf?
While the Gen2 continues to excellently perform in Flat Water, it has also been proven to be a great Surf Hull among numerous Freeriders. Although it was developed as a flat water hull, the Gen2 has much potential in Ocean Riding. We understand that everyone has their preferences when it comes to riding, and even though not everyone will instantly like how the Gen2 rides in the surf, we've built multiple hulls for surf riding, and so far, each owner has been more than impressed with its abilities in freeriding, both in the 20-foot swells of the Australia Surf and in the over head waves of Oceanside and Pismo.
What else?
Unlike some popular hulls that are on the market, all Gen2 hulls and BOB products are made in California, USA. All hulls are hand laid by full-time fiberglass Technicians in a complete fiberglass shop inside a massive PWC shop. All Gen2 hulls also include a 'Made in USA' decal in the handle pole bracket area as part of the standard graphic kit.
Additional Information
| Condition | New |
|---|
